MAIN FUNCTIONS

• Frequency range: TV, CATV and Radio 30 – 1000 MHz SAT 700 – 2,700 MHz
• Frequency resolution: TV and CATV 25 KHz SAT 5 MHz
  Input impedance: 75 Ohm (interchangeable “F” connectors)
  Digital measurements: Digital Power, MER (36 to 40 dB max.; depending on modulation), BER, PER, LDPC, BCH, Noise Margin, MER versus CARRIER.
• Analogue measurements (without picture): Analogue level, V/A ratio
• Power range measurements: TV 35 to 115 dBµV, SAT 5 to 105 dBµV
• Measurement resolution: 0.1 dB
• Measurement accuracy: 1 dB typ. (2 dB max.)
  Filter resolution Bandwidth: TV and CATV: 100 KHz @ -3dB SAT 5 MHz @-3 dB

• Net ID: Net-id, NID, TSID, LCN, SAT Orbit Position
• Spectrum with MAX HOLD: full spectrum and detection with real-time function
• Constellation: for TV/CATV and SAT signals
  Echoes, pre-echoes, micro-echoes: real-time display
• Quality: digital auto-quality test: PASS-MARGINAL-FAIL
  digital picture display: MPEG2-4 SD & HD, pictures with programme list, audio video PIDs, LCN, video bitrate – all on one screen (DVB-T2 with H.264 MPEG-4 NOT H.265/HEVC (Germany);

• SAT memory plan: more than 2,000 transponders for worldwide satellites
• User-defined channel plan: 25 (199 channels per plan), programmable TV cable, SAT (or combined TV cable/SAT) by PC or local keyboard
• Logger: cable, SAT or combined with Stop & Go function
• Audio: AAC (without DOLBY-PAKET)
  exclusive patented
• ROVER AUTODISCOVERY system: automatically detects and selects analogue and digital COFDM/QAM TV signals in measurement and spectrum mode.
• Help function: automatically detects all signals with digital modulation SAT, TV and CATV
• Automatic assistant: signal quality analysis, saving of the channel scan
• Barscan TV and CATV: 10 to 100 channels on one screen

             – buzzer and bounce interval: real-time indication of micro-interference – digital signals

• SAT DiSEqC, SCR, dCSS and antenna commands (HD SATEXPERT function can be ordered as an additional option ex works)
  free SMART PC interface programme and FW upgrades

General Specifications

5 “TFT TOUCH Display 16:9 Resolution High Resoultion and High Brightness
DC voltage at RF input 5 – 12 – 18 – 24 V, DC DiSEqC, SCR, dCSS.
Battery: Li-Po battery, 2 to 4 hours runtime (depending on usage) and battery test function
USB-PC interface: for SW upgrade online and memory plan management
USB-PC interface: for memory stick
Case & bag: Metal case.Easy Bag or Elite Bag for accessories is optional.
Weight: 1,4 Kg. Dimensions 25.5 x 13.0 x 4.0 cm (meter only).